If you are a lover of speed and you love to ride a motorcycle, you may have ever suffered from your motorcycle failing to accelerate, a frustrating fact that can worry you a lot and make it difficult for you to ride a motorcycle.
The downside of failures when accelerating is that they tend to occur intermittently and unexpectedly, which exponentially increases the risk of traffic accidents, since an unexpected change of pace on the road will put your life at risk and put your life in jeopardy. risk the lives of other drivers.
In addition, the failure to accelerate is a type of failure that can be caused by various reasons, some of them are minor and easy to fix and others are more serious and complicated to repair. What should always be done is to remedy it as soon as possible, since if you let it go, it could happen that the faults were getting worse, multiplying in the end the total cost of the repairs.
From doncomos.com we are going to explain all the reasons why a motorcycle fails to accelerate, also trying to explain the remedies that you can put to solve this small unforeseen event and return to being the king of the road.
What do you need:
- Basic knowledge about motorcycle mechanics.
- Observation ability.
Instructions
- Dirty air filter: As with cars and almost all combustion engines, there is an air filter that is capable of filtering all the crap that enters the interior of the engine when carrying out the combustion process. The problem with the air filter is that with use, a large amount of dirt from the outside is deposited inside, which in the end is obstructing the correct passage of air, causing serious problems in the combustion of the engine and leading to failures when accelerating. The way to repair it is to clean or change the air filter, if you know how to do it, it is perfect and if not, it is better to go to a mechanic who will take care of the task.
- Motorcycle spark plug error: The motorcycle spark plug is an essential part when performing the acceleration function of the motorcycle. When the spark plugs are bad, it could happen that the bike loses power, failing to start when they go bad and leaving you stranded on the road. The solution is to change the spark plugs from time to time to make sure that they work well, turning to your trusted mechanic to avoid damaging the motorcycle.
- Injector problems: Another problem that we can have on the motorcycle is a problem with its injectors, which if they are in poor condition also makes it difficult for the motorcycle to accelerate. They may be damaged, they may be dirty, and they may be clogged. Again go to your trusted mechanic to repair the issue of the injectors and leave everything perfectly again.
- Engine problems: One of the most serious problems could be motorcycle engine problems, which could cause it to fail to accelerate and be a sign that the engine has little life left. Changing the engine is usually quite expensive, but it could be that it was just some loose part of it that is easy to repair, if in doubt go to the mechanic as always.
- Carburetor: The carburetor of the motorcycle could also be damaged or dirty, especially this second option, which is the most common. There are people who are capable of disassembling a carburetor and cleaning it themselves, however, the most common is usually the same as always, that is, leave it to the mechanic.
Tips
- Motorcycle maintenance: As you have seen, most of these causes are due to a lack of maintenance on the motorcycle. Even if you have managed to stop the problems in time, this does not indicate that we do not have problems in the future, therefore, maintenance of the motorcycle must be carried out so that it does not happen again. Take the motorcycle to the mechanical workshop every 6 months, to check all its components and check that everything is still in good condition. If you know how to do it, clean the parts of the motorcycle such as the air filter or the carburetor to prevent more dirt from accumulating and starting problems again.
