Many drivers have problems with their car battery because corrosion forms on its terminals. Learning how to clean this corrosion will save you unnecessary expenses and you will solve the problem quickly. Generally, we reserve these issues for men, but women can do it too. Our idea is that you learn how to clean my car battery and you don’t have to seek help.
The battery terminals are one of the parts that get dirty the most and cause these bad moments of not knowing what to do because the car won’t start. One solution is that you keep the battery clean, that you check it and that you know how to recognize when it is in a position to change it, that is, you can clean it a certain number of times but it is not definitive. The battery has a useful life and then it must be renewed. At Doncomos.com we will teach you how to clean my car battery.
What do you need to clean my car battery?
- Baking soda, water, brush (can be an old toothbrush)
- Graphited grease
- Vaseline cream
- Protective gloves and glasses
Instructions to clean my car battery
- Whenever you go to check the battery and, especially, clean it, you must be sure that everything is turned off, that is, that the windshield wipers, radio, lights, etc. are not working. This is essential to avoid accidents when touching the cables.
- For this work it is important to wear protective gloves and glasses. Now you can loosen the terminal nuts and take the battery out of the car engine.
- It is convenient to first remove the terminal from the left terminal and then the one from the right terminal. Make sure that when removing the right terminal, the connector cable should be low so that the terminal does not touch the battery.
- Now you must release the supports and remove the battery. Take a good look at the battery. If you see any cracks that are leaking acid, you will need to replace the battery.
- If this does not happen, you should clean it. For this, prepare a solution of dissolved baking soda and hot water, you must add a teaspoon of baking soda in a cup of water. If you need more, respect this proportion.
- Then, take a plastic bristle brush or an old toothbrush, soak it in this solution and proceed to clean the entire battery cover and posts, until all rust and dirt are removed.
- Once clean, before installing the battery, you must remove the remains of this solution with a little clean water, finally dry it with a clean cloth.
- Now you can reinstall the battery, place it in the place inside the car, adjust the supports well and adjust it well so that it does not move. Lubricate all exposed metal on the battery with petroleum juice or commercial protective spray.
- Finally you must grease the terminals and terminals so that it covers all the metal parts with a film of conductive grease.
Tips to clean my car battery
- Clean and save the gloves and glasses, as well as the products used for the next time.
- Learn about how to repair and maintain your car in good condition.
- You can also buy a battery cleaner, if you use it, read the instructions carefully.
