When the exhaust pipe of a motorcycle is too dirty, the motorcycle consumes more fuel and the engine works hard. This effort ends up wearing out the engine and reducing the performance of the motorcycle. Maintaining a good level of cleanliness in the exhaust pipe and exhaust pipe will help keep your motorcycle in good working order, extending its useful life.
When we want our motorcycle to last as long as possible, taking care of every aspect of it is necessary. Although it is not about failing taking care of our vehicle, we do have to keep it in good condition. This will not only help us to save money, but to avoid safety problems on the road while riding because of some problems that we could have avoided by taking care of our motorcycle.
Learning how to clean the exhaust pipe of the motorcycle is not a mystery and does not have great science. But we do have to maintain order when cleaning this important part of the motorcycle. If we do not properly clean the exhaust pipe, we could ruin it, we would have to buy a new one, or even worse, we would use the same tube even though it no longer works and we would put our integrity and physical health at risk by going out on the street using a vehicle in bad condition
That is why it is very important to know how to clean the exhaust pipe of the motorcycle correctly and that is exactly what we will teach you today.
What do you need to clean the exhaust pipe of the motorcycle?
- Caustic soda
- Hot water
- Pressure hose
- Screwdriver
Instructions to clean the exhaust pipe of the motorcycle
- Start by removing the exhaust pipe. In order to clean the tube, we have to remove the pipe from the exhaust pipe of the motorcycle. We can take advantage of this clearing to clean the pipe as well. We will only need a strong bristle brush that can help us remove waste.
- Unbolt the muffler from the bike. We have to remove the tube completely, for this we must begin by disassembling it using a screwdriver. We must do this with relative precautions.
- Take special care in the way you disassemble the pieces. If you do this too roughly or with improperly sized tools, you could end up damaging parts of the motorcycle when disassembling them. Usually with a cup or a number 12 die, we can disassemble the edge of the tube.
- Remove the packaging of the exosto. It is necessary to remove it in order to clean the entrance.
- Once you’ve carefully removed the tube, it’s time to close the bottom of it. We cap this to add cleaning solution into the tube.
- Add caustic soda and hot water. It is best to do this by wearing gloves that can protect you from the chemicals, plus wear a face mask or mask to avoid breathing in the toxic fumes. Avoid contact with this solution as much as possible.
- Let this sit and allow it to take effect. This should sit for 10-15 minutes to do a good cleaning effect.
- Subsequently, we must remove the waste by emptying the tube, taking care that none of the waste touches your skin. Make sure this goes straight down the drain.
- With the hose, apply pressurized water with the tube uncovered. We apply water to remove excess residue, because although the exhaust pipe material is resistant, caustic soda is very corrosive and can damage metal. As if that weren’t enough, breathing soda residue when the motorcycle is burning could be harmful.
- Let dry and assemble it back to the motorcycle. Once you have followed these steps you will have finished cleaning the exhaust pipe of your motorcycle.
Tips to clean the exhaust pipe of the motorcycle
- Detergent and other kinds of cleaners often do not remove or thoroughly clean the residue left by combustion in the exhaust pipe, so the ideal is to use caustic soda. However, if you consider that this product is too aggressive, you can ask at an auto store about a cleaner that you can use to perform this cleaning procedure.
- For safety reasons it is better that you change the packaging of the exhaust every time you do a cleaning. We do this in order to acquire better security by avoiding the use of worn parts that contribute to the problem of leaks that wear out the engine.
- If you know of any other ways to clean a motorcycle exhaust, please share your ideas in the comments below.
