Oil is one of the essential elements for the proper functioning and maintenance of the engine of any vehicle, be it a car or a motorcycle. That is why you must be very attentive to the need for oil changes and for this you must know how to check it. In this article we explain in detail how to check the oil of a two-stroke motorcycle.
The oil lubricates all the components of the engine of a two-stroke motorcycle, so checking if there is enough oil or if it is time to renew it is essential for the useful life of your motorcycle. It is normal for the oil to get dirty since, as we said at the principle lubricates all moving parts of the engine. It is advisable to check the oil periodically, the more often you do it, the better. For this there are two ways: with the typical rod or with the porthole that allows you to see it. The proper functioning of your two-stroke motorcycle depends on the care you give it and the controls you do to achieve good maintenance, oil control is essential.
What do you need to check the oil of a two-stroke motorcycle?
- Measuring rod or bull’s eye
- Oil recommended by the manufacturer.
Instructions to check the oil of a two-stroke motorcycle
- In 2-stroke motorcycles, the oil has to lubricate all the bearings, the gearbox and the clutch, after having gone through the rest of the other parts. It is logical that it gets dirty quickly, therefore revisions are very important.
- To check the oil we can opt for the classic dipstick to check the oil level by inserting it into the indicated hole and then looking at the oil level it has or if it is dirty. In this case, it is recommended that we put on gloves to avoid stains that are difficult to remove.
- In the manual you will always find the manufacturer’s recommendations, not only on how and when to check the oil, every few km to change it, but also on all issues inherent to the motorcycle, so it is worth looking at the manual, especially when the motorcycle is new.
- Through the rod you can check the level and through the porthole that is in the lower part of the crankcase, this will allow you to observe the color to determine if the oil is very dirty or if it has mixed with water.
- The best thing to check the oil on a motorcycle is that it is located on a flat surface and that the engine is If you are not using it, start the engine for a few minutes and with this you will make the oil more viscous.
- Most of the motorcycles use only one type of oil but we must confirm that ours is like that. Another chance to read the manual.
Tips for checking the oil of a two-stroke motorcycle
- It is necessary to take into account all the specifications and recommendations of the manufacturer.
- Read tips on how to repair and maintain motorcycles.
- Always check the manufacturer’s manual before checking the oil level or doing any other check.
