As we know the engine of our motorcycle must always be clean, I don’t know if not because if it is dirty it will cause a malfunction of the machine. To be able to clean the motor, it is necessary to use water, so we recommend that before placing the water, all the elements that refer to electricity are completely covered. Today we are going to teach you everything you need to ensure that the useful life of your motorcycle’s engine lasts.
What do you need to clean the engine of my motorcycle?
- Plastic and adhesive tape to cover the electronic parts
- Degreasing liquid that can be bought at any specific motorcycle store
- Brush
- Hose
- Pressurized water
- A rag to dry
Instructions to clean the engine of my motorcycle
- In the event that you have used the motorcycle before wanting to clean its engine, you must bear in mind that it is necessary to cool it down first. There are many kinds of motorcycles that have an open engine, but there are also many models for which it will be necessary to remove the fairings. When we already have the engine outdoors and its temperature is cold, it is the right time to cover all the electronic components with plastic.
- We will use adhesive tape to cover the electronic areas, and in this way we can start washing and the motor does not get wet. You must bear in mind that all the electronic parts have to be very well covered because if some water enters they can be damaged.
- Once all the electronic parts are covered we can start spraying the remaining parts of the engine with a degreasing product. As the word says, what this product does is remove all the grease from the engine, so we must let it act for 5 minutes and then rub it with a brush in the most dirty areas.
- When we have removed all the dirt, we will use water to rinse, but if we see that the engine has not been completely clean, we can use pressurized water and thus finish cleaning and completely removing the grease from the engine.
- We must be very careful that the parts covered with plastic and adhesive tape do not get wet, because this can mean that we have to spend a few hours without being able to use our motorcycle, until it is completely dry. If we were to turn on and ride the motorcycle with the electrical parts of the engine wet, it can break down and that will imply a lot of money.
Tips to clean the engine of my motorcycle
- It is essential to know that after having washed the engine of our motorcycle we must let it dry completely. To speed up the process, we can use a cloth and in this way remove all the moisture, but it is advisable to leave it for a couple of hours before using it again.
- Learn everything possible about how to care for a motorcycle engine
- Make sure that your motorcycle is always clean, this will help to increase its useful life, and its ride is more pleasant.
